Garden Layering Landscaping Technique - A Simple Way To Layer Beauty Into Your Garden
August 1, 2009 by admin
Garden layering landscaping is a simple yet effective technique for increasing the depth and beauty of your garden design.
By placing your plants in rows at various heights, you can expose more of your plants and flowers in a smaller area, giving it a richer and fuller look.
This garden layering article is brought to you by LidoGates, a custom wood gate company providing excellent quality garden wood gates for various cities in Southern California.
For more information on how you can get a beautiful custom wood gate for your garden, contact:
LidoGates
949-642-1111
PO BOX 3253
Newport Beach, CA.
92659
Garden layering is a simple and effective landscaping technique that can easily enhance the look of your outdoor garden. By layering your garden landscaping beds you will be able to add a whole other level of beauty to your landscaping design. Remember that besides your garden wood gate, your yard is the first thing that people will notice.
The garden layering landscaping technique works like this: First, you need to identify the flowers that you are going to plant. The reason is that what you choose for your flowers and other plants will affect just how your garden landscaping is laid out.
For example you do not want to have the taller plants in front of the shorter ones. While this may seem obvious at first, many people overlook this when designing their landscaping since they normally forget to consider elevations. They sketch it out on a flat piece of paper looking down, considering only the border size of their garden. So when making your rough sketches, be sure to think about how the eye will perceive the garden from multiple side views and not just a top view.
Keep your garden design simple at first as your landscaping will go a lot faster this way and you will run into fewer problems as you go.
When doing the layering design you should start off with about three layers. Your back row should face north, if possible, and the back row should have the tallest plants. As the rows descend so should the heights of the plants and flowers.
Be sure to remember the eventual height of the plants when they are full grown. This idea is often overlooked since we typically purchase plants when they are small and we sometimes forget that once their are full grown they may block the view of the plants in the rows behind it. So you will need to talk to those working at your local gardening store about how large the plants will grow to be.
This layering effect of your garden landscaping design is sure to add a new level of beauty, depth and interest to your garden.
Asian Themed Gates For Your Japanese Garden
July 27, 2009 by admin
A custom Asian themed gate will complete the look of your Japanese garden. LidoGates has an assortment of resin-encapsulated bamboos and reeds that can be the perfect accent, giving your Japanese garden a clean and serene nuance.
For more information on how you can get a custom built Asian themed gate for your Japanese garden, contact:
LidoGates
949-642-1111
PO BOX 3253
Newport Beach, CA.
92659
Japanese gardening is designed to produce a scene that mimics nature through the use of trees, shrubs, rocks, sand, artificial hills, ponds, and flowing water as art-forms. Zen and Shinto themes are a large part of Japanese gardening, giving the gardens a contemplative and reflective state of mind. Japanese gardening differs from Western style gardens and most would say it is far more serene and introspective.
In Japanese gardening there are three basic methods for scenery. The first of these is reduced scale. Reduced scale is the art of taking an actual scene from nature, mountains, rivers, trees, and all, and reproducing it on a smaller scale. Symbolization involves generalization and abstraction. An example of this would be using white sand to suggest the ocean. Borrowed views refers to artists that would use something like an ocean a forest as a background, but it would end up becoming an important part of the scene.
There are essentially two types of Japanese gardening: tsukiyami, which is a hill garden and mainly composed of hills and ponds. The other is hiraniwa, which is basically the exact opposite of tsukiyami: a flat garden without any hills or ponds.
The basic elements used in Japanese gardening include rocks, gravel, water, moss, stones, fences, and hedges. Rocks are most often used as centerpieces and bring a presence of spirituality to the garden. According to the Shinto tradition rocks embody the spirits of nature. Gravel is used as a sort of defining surface and is used to imitate the flow of water when arranged properly. Stones are used to create a boundary and are sculpted into the form of lanterns. Water, whether it be in the form of a pond, stream, or waterfall, is an essential part of a Japanese garden. It can be in the actual form of water or portrayed by gravel, but no matter what form water is in, it is crucial to a Japanese gardens balance.
There are several forms and types of plants that are signature of Japanese gardening, the main one being Bonsai. Bonsai is the art of training everyday, average plants, such as Pine, Cypress, Holly, Cedar, Cherry, Maple, and Beech, to look like large, old trees just in miniature form. These trees range from five centimeters to one meter and are kept small by pruning, re-potting, pinching of growth, and wiring the branches.
Japanese gardening is a tradition that has crossed the Muso Soseki, poet, said “Gardens are a root of transformation”. A Japanese garden is sure to bring about many different feelings and is definitely a transforming experience.
Selecting Your Wood Gate Finish
September 29, 2008 by admin
Getting the right color and finish for your wood gate project is a step by step process that when done correctly, will bring out the best results to enhance the look of your home.
First of all, you should decide if you are going to have a wooden gate that is stained (for a wood finish appearance) or a gate that will be painted. Much of this will depend on the style of your home and the existing finishes and colors. Houses with siding are often trimmed with a white, cream, or light colored paint. Keeping this in mind, if you have this style of home you probably will want to match the trim color.
Stucco and brick homes open up all kinds of opportunities for stained wood gates. You want to take into consideration the style of your home and what type of wood you want to use for your gate. Hardwoods are a better choice for the life of the wood gate and it’s exposure to the elements.
You may be matching an existing color palette in your garden if the finish is for a garden gate or you may want to match the color for an existing architectural trim. Whatever the case you will need to select the type of wood for our gate, the final color you want to achieve, the type of stain, and finally the top coat that you want to use.
There are decidedly different types of wood gate stains and particular methods to achieve the final look that you want. It is important to note that stains are colorants, not protectants, that are used to make the wood grain more noticeable, change the color of the wood, or imitate a different wood species. After staining the wood gate can be filled and sealed.
Stains contain soluble dyes or insoluble pigments as coloring agents that also keep the stains in liquid form.
Water Stains are powders that are mixed in water. They provide a fade-resistant, clear, permanent color and are the most difficult stain to apply to the gate properly and therefore are usually not a first choice for a stain finish.
Penetrating Oil Stains are premixed and available in a variety of colors. However they are likely to fade and bleed into other coats of the finish and are not recommended for most applications.
Pigmented Oil Stains are the easiest to apply and will not raise the wood grain on your gate. The good news is that they are sold premixed and are available in a variety of colors. And because of the ease of application and availability of premixed colors we recommend these stains for your project.
So to begin the process you will need to have several pieces of wood of the type that you want to use for your gates. These pieces come preferably from the same supplier where you will buy the wood for your project. If you tell the supplier about your project they may even give you some scrap pieces of wood but remember these pieces need to be large enough to give a good feeling for the wood. Wood has variations, places where the grain is tighter and looser, and your stain may react differently in each of these areas. So you need to know what these variations will look like after applying the color in order to make a final selection for your project.
You may want to buy several different colors of stain, depending on how close you need to make a color match.
Apply the stain to each piece of wood and allow it to dry thoroughly.
At this time you may want to also experiment with different types of topcoats in order to see what the woods final appearance will be.
It is best to complete this entire process of sample making and finishing before starting to apply the finish to your wood gates. Otherwise you can end up very quickly with a color and look that is 180 degrees from what you are trying to achieve.
And if all of this seems to complex you may want to turn the job over to a wood gate finishing professional who can go through this entire finishing process to create the type of garden gate or fence gate that will add years of beauty and safety to your home!
Wood Gate Hardware Bronze Knobs
September 28, 2008 by admin
|
Bronze Finish, Egg Shape |
|
Bronze Finish, Round Shape |
Wood Gate Hardware Nickel Knobs
September 22, 2008 by admin
|
Nickel Finish, Egg Shape |
|
Nickel Finish, Round Shape |
Now Offering Baldwin Knobs and Handle Sets For Your Wood Gate
September 22, 2008 by admin
We are very proud of the wood gate workmanship we put into each and every custom gate we create for you. And so after a long and exhaustive search for a company that takes as much pride in their work as we do, we are happy to announce that we will be offering the Baldwin brand of wood gate knobs, levers, and handle sets.
Baldwin is a noted industry leader when it comes to creating the highest quality hardware entry sets and we know that their commitment and reputation for providing the very best in performance and style makes them the perfect partner for us in making your wood gate a work of enduring quality that you will enjoy for years to come.
Like many real estate experts, we are a firm believer that along with overall wood gate design the entry set hardware makes a lasting impression on everyone who enters your home. Because of Baldwin’s superior technical excellence and experience, they are able to provide just the right entry set for you.
The Baldwin name is synonymous with quality and style and their wood gate hardware is made to last throughout the life of your door.
Baldwin entry set hardware is truly an investment in your home that will pay dividends for many years to come.
Wooden Gates – Give Them A Long Life With Your Final Coating
September 18, 2008 by admin
The final coats on your custom wood gate can both enhance its color as well as give your wooden gate extra protection. You want gates that not only look good but also give you long-lasting carefree maintenance.
The first step is to apply a sealer to the wood. The sealer permeates the wood pores so topcoats adhere to the surface and are not absorbed into the wood. Sealer selection is based on the type of topcoat to be applied. Polyesters, polyurethanes, and other synthetic finishes require specialized sealers.
Next, the topcoat is applied which helps to protect the wood from moisture and wear. To prevent the topcoat from yellowing with age, ultraviolet or UV inhibitors can be added.
Polyesters are the hardest type of topcoat. They are nearly 100% solid when applied and are almost as durable as high-pressure plastic laminates when cured. They also have good filling and leveling characteristics. Typically polyesters have a very glossy finish but can be found in matte finishes as well. The application of polyesters requires special equipment and skills.
Catalyzed polyurethanes are among the most durable finishes and are easier to apply than polyesters. Many consider them the first choice for commercial wood finishing.
Part of your final decision will depend on which area of the country you live, and how you intend to maintain the finish of your wood gates. Some people like a natural looking oiled finished that required regular maintenance and others want something that is easy and carefree in more inclement environments.
Make sure and consult your local professional on caring for your wood gate based upon the local weather conditions and environment.